Please see below for the most common equipment and call us to discuss your specific needs.

Nyle KILN DOORS are rugged, reliable and well insulated. They are custom made to fit, whatever size is needed. Nyle produces double swing doors, lift and roll doors and vertical bifold doors, dependent on your preferences and needs. All are built in our Maine plant to assure highest quality and reliable fit.

The COILS are a key component to get right to have a system that lasts. Nyle coils come in three grades: Good, Better and Best. All three work equally well but the difference is in how the coils are made. The Good coils are copper tubes with aluminum fins in aluminum or steel casing. These are low cost and may fit those with a limited budget who will change to a better grade coil in a few years.

Over the years, Nyle has worked exclusively with a quality coil provider to develop coils that last. Specifically for the lumber industry. Both our Better coated copper and Best stainless steel style were developed this way. The Better coils are copper tubes/aluminum fins with aluminum casing and the whole coil is coated with a special corrosion resistant material, greatly extending the life cycle of the coil. We were the first and may still be the only company to use coated coils in kilns. The Best coils are stainless steel tubes, headers and casing with aluminum fins. These are virtually permanent coils.

Nyle FANS use our extended venturi fan housing which optimize fan performance. The motor and propellers can be reversing or non-reversing and are designed to withstand the rugged conditions in a kiln.

Nyle VENTS are aluminum and seal tight when closed with an insulated and gasketed door. The door is opened and closed by either a stainless steel pneumatic operator or a high performance electric actuator.

Nyle CONTROL SYSTEMS are reliable, simple to use and range from basic to state-of-the-art computer based. All are developed and supported by the Nyle Team.

Nyle SPRAY or humidification systems are available for conditioning or stress relief. We have systems based on steam, high pressure water (700 psi) and low pressure water (60-100 psi).